Inovia CR-M1631C is developed for glass fiber reinforced PA6. It can afford UL rating of V0 at 0.8mm and 1.6mm and has no blooming on the surface for above 3000h (85℃, 85%RH). Compared to conventional flame retardant, flame retardancy is more stable, mechanical properties obtained are better.

1. Materials

PA6: Juheshun PA6-J2700

Flame retardant: Inovia CR-M1631C

Glass fiber: Jushi EDR14-2000-988A

2. Processing

2.1 Drying: 110 ℃, 4~6 h.

2.2 Extrusion temperature: 220~250 ℃

2.3 Injection temperature: 230~250 ℃; mold temperature: 80 ℃

3. Application Example Data

Table 1. Flame Retarding Properties

Table 2. Mechanical and thermal properties

Table 3. Other properties

Summary

CR-M1631 when used in glass fiber enforced PA66 can be stable for more than 3000 hours under standard (double 85 condition), which is no detectable blooming on the surface. Additionally, the resulting plastics show high flowing behaviors and better processability.

Reinforced PA6 Retardent CR-M1631 (Blooming Proof)-SDS.pdf

Reinforced PA6 Retardant CR-M1631 (Blomming Proof)_TDS.pdf